Extra Deep Walkover LED Aluminium Profile 21.3mm x 25.9mm

Specifications:

• Dimensions (overall WxH): 21.3mm x 25.9mm - please refer to the dimension drawing for full dimension detail
• Max Tape Width: 12mm
• Diffuser thickness: 5mm
• Water Resistance: IP20
• Material: Aluminium channel, Polycarbonate Diffuser
• Anodised Anti-Corrosion Finish

Applications:

• Walkways & Corridors: Integrated into floors to guide paths or create ambient lighting.
• Entrance Lighting: Installed at entryways or exits for a modern look and enhanced visibility.
• Hotels & Restaurants: In lobbies or dining areas to create ambient lighting or guide guests.
• Theatres & Entertainment Venues: On aisles or stages, it can offer both practical lighting and enhance the ambiance.
• Garages & workshops: This profile is suitable to be driven over when recessed, meaning it can help provide both ambient and practical lighting in these sorts of environments.

Additional information:

• End caps are available to purchase separately
• Install using a suitable mounting adhesive or mounting screws
• Available in silver
• Choice of 2 or 3-metre lengths
• Diffuser included

Due to its depth and robustness, our Extra Deep Walkover LED Aluminium Profile with dimensions of 21.3mm x 25.9mm offers special advantages.

The greater depth provides an extra degree of defence from dirt and impact for the LED strips. This profile works best for floor installations due to its name implies, that it is sturdy enough to be walked and even driven over without damaging the LED strip inside.

The depth can also help generate a more uniform and diffused light output and reduces spotting or focused brightness that can occasionally be observed with shallower profiles. Deep profiles can give an installation a more upscale appearance, especially when incorporated into architectural plans.

Hints and tips:

Diffusers

Diffusers will affect the brightness and CCT (colour temperature) of an LED tape when housed in an LED channel or profile. With a semi-clear diffuser 70-75% of the brightness of the installed LED strip light will shine through

As well as the brightness, diffusers will also alter the kelvin temperature of the installed LED strip light by approximately 10%. Opal diffusers will make the Kelvin temperature/CCT appear warmer, semi-clear diffusers will make the Kelvin Temperature/CCT appear cooler and transparent diffusers will have no effect.

As an example, a 6000K 1000 lumen per metre LED strip light installed inside a metre length of LED channel using an opal diffuser would create a light bar with an overall output of approximately 5600K and 450 to 500 lumens.

Non-spotting finish

To achieve a highly desired non-spotting finish, consider using this profile with an LED tape of more than 120 LEDs per metre or a COB LED strip light. The more LEDs per metre on your chosen strip light, the less chance there will be of a spotting/dotting effect. 

Bespoke lengths available

Ultra LEDs are one of just a few providers in the UK to supply custom channel lengths for easier installation. Simply get in touch for a bespoke quotation.

Perfect for indoor use

This profile is made from fully anodized aluminium and is corrosion-proof, which helps to maintain the longevity of this robust profile.