Bendable Plaster-In Recessed LED Aluminium Channel 61.5mm x 14mm

Specifications:

• Dimensions: 61.5x14mm
• Max Tape Width: Up/Down 20mm, Left/Right 4mm
• Max Bend Radius: Up/Down 200mm, Left/Right 250mm
• Material: Anodized Aluminium
• Diffuser Available: Silicone

Applications:

• Office and Commercial Spaces: For creating a modern, minimalist lighting solution in conference rooms, reception areas, or hallways.
• Retail and Showrooms: To highlight products and create an inviting ambiance for customers.
• Wall Accents: Integrated into curved walls, ceilings and archways.
• Staircase Lighting: Used along staircases to provide both an aesthetic touch and functional illumination, improving safety.

Additional information:

Plaster-in LED aluminium profiles are designed to be seamlessly integrated into plasterboard (drywall) surfaces. Once installed and the plasterwork is completed, only the light output from the LED strip is visible, with the profile itself being completely hidden.

This provides a sleek and minimalist lighting effect, free from visible wires, connectors, or the actual LED profile.

Hints and tips:

Diffusers

Silicone diffusers will affect the brightness and CCT (colour temperature) of an LED tape when housed in a LED channel or profile. The separately sold silicone diffuser means 50-60% of the brightness of the installed LED strip light will shine through.

Non-spotting finish

Vertical Bend: To achieve a highly desired non spotting finish we recommend using an SMD LED strip with a minimum of 120 LEDs per metre.

Horizontal Bend: To achieve a highly desired non spotting finish we recommend using 2x lengths of our PS24 140 LEDs per metre strip, attached to both internal sides of the profile.

As a rule of thumb, the more LEDs per metre on your chosen strip light, the less chance there will be of a spotting/dotting effect. 

Please note:

End Caps must be purchased seperatley and can be found in the 'add ons' section.

We recommend purchasing more strip light than the total length of your profile, as bending the profile reduces the distance the strip light can cover.

Handle with cut resistant gloves when moving and bending the profile.

If using in combination with 6114 linear profile you must use the silicone diffuser only. We recommend DIFSIL-PLSTD-10M/OP which can be found in the 'add ons' section.